• BrassCraft CSSD104E-48 X 1/2-Inch Female Flare EFV x 1/2-Inch MIP x 48-Inch Safety PLUS Gas Connector with  1/2-Inch OD

BrassCraft CSSD104E-48 X 1/2-INCH Female Flare EFV x 1/2-INCH MIP x 48-INCH Safety PLUS Gas Connector with 1/2-INCH OD

Brass Craft's 1/2 In. Female Flare EFV x 1/2 In. MIP x 48 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 60,500 BTU's. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of Recoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. Recoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the Recoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. BrassCraft's 1/2 In. Female Flare EFV x 1/2 In. MIP x 48 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 60,500 BTU's. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

BrassCraft CSSD104E-48 X 1/2-INCH Female Flare EFV x 1/2-INCH MIP x 48-INCH Safety PLUS Gas Connector with 1/2-INCH OD

  • 1/2 In. OD x 48 In. stainless steel connector w/corrosion resistant coating
  • 1/2 In. female flare excess flow valve (to gas supply) and 1/2 In. MIP (3/8 In. FIP tap) steel fitting (to appliance)
  • 60,500 BTU max flow capacity. Use with natural or LP (propane) gas
  • Temperature rating: 32 to 150 Degrees F. Pressure rating: 1/2 psi maximum
  • 100% leak tested. Approved for indoor and outdoor use, temps permitting. CSA certified

BrassCraft CSSD104E-48 X 1/2-INCH Female Flare EFV x 1/2-INCH MIP x 48-INCH Safety PLUS Gas Connector with 1/2-INCH OD

Item Weight1 pounds
Product Dimensions49.2 x 1.3 x 1.3 inches
Item model numberCSSD104E-48 X
Item Package Quantity1
Batteries Required?No

Write a review

Note: HTML is not translated!
    Bad           Good

BrassCraft CSSD104E-48 X 1/2-Inch Female Flare EFV x 1/2-Inch MIP x 48-Inch Safety PLUS Gas Connector with 1/2-Inch OD

  • from BrassCraft
  • Product Code: FTSE2520
  • Condition: BRAND NEW
  •  Out of Stock.
  • $117.64   + 7.99 Shipping