• Berkey PF-2 Fluoride/Arsenic Replacement Filters, 2-Pack

Berkey PF-2 Fluoride/Arsenic Replacement Filters, 2-PACK

The PF-2 is for use with Black Berkey Purifiers - If you use ceramic filters, you will need the PF-4 PF-2 reduction elements are designed for use in conjunction with Black Berkey water purification elements to adsorb the following unwanted elements found in drinking water. Fluoride, Arsenic V and pre oxidized Arsenic III, Other residual heavy metal ions. FLUORIDE: Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (99.75% reduction). ARSENIC: This product uniquely targets the entire family of arsenic oxide anions as well as the arsenic cations. REPLACEMENT: Under normal conditions it is recommended that each set of two PF-2 elements be replaced after 1,000 gallons. The PF-2 is for use with Black Berkey Purifiers - If you use ceramic filters, you will need the PF-4 PF-2 reduction elements are designed for use in conjunction with Black Berkey water purification elements to adsorb the following unwanted elements found in drinking water. Fluoride, Arsenic V and pre oxidized Arsenic III, Other residual heavy metal ions. FLUORIDE: Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (>95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (>99.75% reduction). ARSENIC: This product uniquely targets the entire family of arsenic oxide anions as well as the arsenic cations. REPLACEMENT: Under normal conditions it is recommended that each set of two PF-2 elements be replaced after 1,000 gallons.

Berkey PF-2 Fluoride/Arsenic Replacement Filters, 2-PACK

  • The PF-2 is for use with Black Berkey Purifiers - If you use ceramic filters, you will need the PF-4
  • Primarily Filters Fluoride and Arsenic
  • Attaches to the bottom of a Black Berkey Purifier - Used as a Post-Filter
  • For use with Big Berkey, Travel Berkey, Berkey Light, Royal Berkey, Imperial Berkey, Crown Berkey

Berkey PF-2 Fluoride/Arsenic Replacement Filters, 2-PACK

Part NumberPF2
Item Weight1.6 pounds
Product Dimensions4 x 2 x 2 inches
Item model numberPF-2
Item Package Quantity1
Number Of Pieces2
Batteries Required?No

Write a review

Note: HTML is not translated!
    Bad           Good

Berkey PF-2 Fluoride/Arsenic Replacement Filters, 2-Pack

  • from Berkey
  • Product Code: FTSE3434
  • Condition: BRAND NEW
  •  In Stock.
  • $54.10   + 7.99 Shipping