• BOSS Audio MCK1306W.6 Combo Kit Includes MR1306UA AM/FM MECHLESS Receiver, One Pair of 6.5

Detachable Face Plate

General Features (MR1306UA Receiver)

DETACHABLE FACE PLATE: The front face plate detaches and you can carry it with you. UV PROTECTIVE COATING: Since the MR1306UA is under the sun a lot of the times, the outside shell has a Ultra-Violet coating to protect it from the damaging effects that the sun offers. The PC board is also coated to have the protection that IT needs from the corrosion that humidity and salt can bring on over time. ZERO CURRENT DRAW MEMORY: A lot of us have had the battery die at one point or another. Sometimes we might just need to replace it. This can mess with all the systems that depend on being hooked up to a power source in order to be able to maintain some saved data. In this case, the MR1306UA. It holds information such as the time/date, presets for your favorite radio stations and such. If you ever happen to be without a battery for a short period of time, you will not lose all of the information that you had previously saved. All thanks to this little helper. FRONT AUX (Auxiliary) IN: This input is an interface that allows the input of audio signals for MP3 players, headphones and portable music players. It is for AUDIO ONLY and not video.

Compatible With Audio Output of Smartphones and MP3 Players (MR1306UA Receiver)

A great feature that comes in really handy is that little hole that says “AUX”. What this means is that if you can connect a device that has an Auxiliary output, such as your iPhone/iPod, smartphone and MP3 players straight into the Auxiliary input of your head unit. So basically a cable that has (2) 3.5mm audio (male) plugs. Important: Please beware that this feature is not the same as the “Full iPod Control”. This feature will only allow you to control your music by clicking on the designated buttons via the face or front side of your unit.

Specifications (MR1306UA Receiver)

1. USB & SD Ports 2. Playback - MP3 / WMA 3. Power Output: 50W x 4 Channels 4. RCA outputs 5. FM frequency range: 87.5 – 107.9MHz 6. Sensitivity: Better than 15 dB at S/N 30 dB 7. Stereo separation: 25 dB at 1KHz 8. S/N ratio: 50 dB 9. AM frequency range: 530 – 1710KHz 10. Sensitivity: Better than 45 dB 11. S/N ratio: 40 dB 12. Power supply: DC 11-14V 13. Polarity: Negative ground 14. Speaker impedance: 4 Ohms


Voice Coil – Aluminum (MR6W Speakers)

One of the most abundant elements on earth, Aluminum is remarkable for its low density and for its ability to resist corrosion. It is nonmagnetic (does not have any magnetic properties) and does not easily ignite. This solid material has the ability to perform under stress in both high tension and high compression environments. Aluminum is relatively soft making one of the more ideal materials to use in voice coils.

Tweeter – Mylar (MR6W Speakers)

For a modern edge, the best car speaker could be the high tech Mylar tweeter, as it generally has more ability for a wider variance of sound modifications and channel handling. Unlike paper cones, the Mylar has a higher rate of durability, as the cone is made of a plastic poly material, which does not rip or tare easily, under abnormal frequency changes.

Cone – Poly Injection (MR6W Speakers)

A substance called “Polyurethane” and is categorized as a “Polymer". It is a resilient, flexible and durable manufactured material that can take the place of paint, cotton, rubber, metal or wood in thousands of applications across virtually all fields. It can be hard like fiberglass, squishy like upholstery foam, protective like varnish, bouncy like rubber or sticky like glue. In the specific case of our cones, this material allows for maximum flexibility that produces great sounding speakers lasting you a long, long time.

Specifications (MR6W Speakers)

1. 6.5 inch Marine Speakers 2. Peak Power: 180 Watts 3. RMS Power: 90 4. Impedance: 4 Ohms 5. Frequency Response: 80Hz – 20kHz 6. Sensitivity: 89 dB @ 1 W/1 Meter 7. Mounting depth: 2-1/4”

Surround – Rubber (MR6W Speakers)

Rubber is a synthetic (man made) rubber and is valued for its chemical inertness, impermeability to air and the ability to endure or resist exposure to the many types of weather fronts. Rubber has many different applications. Anywhere from Sports equipment to automotive parts, the medical industry and more. We use them for the Surrounds that connect the cone to the basket. Did you know that most modern chewing gum uses food-grade rubber as the central gum base, which contributes not only the gum's elasticity but an obstinate, sticky quality? Just like that chewing gum, the Rubber Surround in our speakers can take the equivalent amount of abuse without quitting on you.

Remote Control

  • MR6W - 6.5" -180 Watt 2-way Marine Loudspeakers (Pair)
  • Mrant10 Marine Dipole Antenna
  • Marinised circuit boards and terminals
Technical DetailsIntegrated Card Reader

Write a review

Note: HTML is not translated!
    Bad           Good

BOSS Audio MCK1306W.6 Combo Kit Includes MR1306UA AM/FM MECHLESS Receiver, One Pair of 6.5" MR6W

  • from BOSS Audio
  • Product Code: FTSE6230
  • Condition: BRAND NEW
  •  Out of Stock.
  • $152.82   + 7.99 Shipping